NAMO N2001-E-212

NAMO N2001-E-212

Model No: NAMO N2001-E-212

  • Dual AMD EPYC™ 7003/7002 Series Processors
  • 8TB Registered ECC DDR4 3200MHz SDRAM in 32 DIMMs
  • Expansion slots: 2 PCI-E 4.0 x16 (FH, 10.5" L) slots, 1 PCI-E 4.0 x16 (FH, 9.5" L) slot, 1 PCI-E 4.0 x16 (LP) slot, 1 PCI-E 4.0 x8 (FH, 9.5" L, in x16) slot, 1 PCI-E 4.0 x8 (internal proprietary LP in x16) slot
  • Integrated IPMI 2.0 + KVM with dedicated LAN
  • Dual 10GBase-T LAN ports via Intel® X710-AT2
  • 12 hot-swap 3.5" Drive Bays: 12 SATA3 by default, or 8 SATA3 + 4 NVMe via optional tray, or 12 SAS3 via optional SAS kit
  • 1600W Redundant Power Supplies Titanium Level (96%+)
Processor
CPU
  • Dual AMD EPYC™ 7003/7002 Series Processors (The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
  • Socket SP3
  • Supports CPU TDP up to 280W
Cores Up to 64 Cores
Chipset System on Chip (SoC)
System Memory
Memory Capacity
  • 32 DIMM slots
  • Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM
  • 8-channel memory bus
  • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM Sizes 8GB, 16GB, 32GB, 64GB, 128GB, 256GB
Memory Voltage 1.2V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
Expansion Slots
  • 2 PCI-E 4.0 x16 (FH, 10.5" L) slots
  • 1 PCI-E 4.0 x16 (FH, 9.5" L) slot
  • 1 PCI-E 4.0 x16 (LP) slot
  • 1 PCI-E 4.0 x8 (FH, 9.5" L, in x16) slot
  • 1 PCI-E 4.0 x8 (internal proprietary LP in x16) slot
On-Board Devices
SATA SATA3 (6 Gbps)
Network Controllers
  • Provided via Riser Card
  • 1 Realtek RTL8211F PHY (dedicated IPMI)
IPMI
  • Support for Intelligent Platform Management Interface v. 2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • ASPEED AST2500 BMC
Input / Output
SATA 12 SATA3 (6 Gbps) ports
LAN
  • Dual 10GBase-T LAN ports via Intel® X710-AT2
  • 1 RJ45 Dedicated IPMI LAN port
USB 3 USB 3.0 ports (2 rear + 1 Type A)
VGA 1 VGA port
SAS 12 SAS3 ports support via optional SAS kit
NVMe 4 NVMe support via optional tray
Others
  • 1 COM port (rear)
  • 2 SATA DOM power connector
  • TPM 1.2 header
Power Supply
1600W Redundant Power Supplies Titanium Level (96%+)
Chassis
Form Factor 2U
Dimensions
Height 3.5" (89mm)
Width 17.2" (437mm)
Depth 28.46" (723mm)
Drive Bays / Storage
Hot-swap
  • 12 hot-swap 3.5" Drive Bays:
    • 12 SATA3 by default
    • or 8 SATA3 + 4 NVMe via optional kit
    • or 12 SAS3 via optional SAS kit
System Cooling
Fans 4 heavy-duty PWM fans with optimal fan speed control