NAMO N3201-I-116

NAMO N3201-I-116

Model No: NAMO N3201-I-116

  • Supports 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors, Single Socket LGA-3647 (Socket P) supported, CPU TDP supports Up to 165W TDP
  • Intel® C621 Chipset
  • 8 DIMM slots
  • 16 x 3.5" hot-swap SAS/SATA drive bays
  • 2 PCIe 3.0 x8 (in x16), 4 PCIe 3.0 x8, 1 PCIe 3.0 x4 (in x8)
  • 2 Nos. GbE LAN ports
  • 3 x 8cm hot-swap redundant PWM cooling fan(s)
  • 800/1000W Redundant Platinum/Titanium Power Supply
Processor
CPU
  • 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors
  • Single Socket LGA-3647 (Socket P) supported, CPU TDP supports Up to 165W TDP
Core Up to 28 cores
System Memory
Memory Capacity
  • 8 DIMM slots
  • Up to 2TB 3DS ECC LRDIMM, DDR4-2933MHz; Up to 2TB 3DS ECC RDIMM, DDR4-2933MHz
  • Up to 1TB Intel Optane DC Persistent Memory in memory mode (Cascade Lake Only)
Memory Type Supported 2933/2666/2400/2133 MT/s ECC DDR4 LRDIMM (3DS), RDIMM (3DS)
DIMM Sizes Supported
  • LRDIMM: 32GB, 64GB, 128GB
  • RDIMM: 8GB, 16GB, 32GB, 64GB
Memory Voltage 1.2V
Error Detection Corrects single-bit errors
Expansion Slots
PCIe
  • 2 PCIe 3.0 x8 (in x16 slot),
  • 4 PCIe 3.0 x8,
  • 1 PCIe 3.0 x4 (in x8 slot)
M.2
  • M.2 Interface: PCIe 3.0 x4; SATA
  • Form Factor: 2280, 22110
  • Key: M-Key
On-Board Devices
Chipset Intel® C621
SATA Intel® C621 controller for 8 SATA3 (6 Gbps) ports; RAID 0,1,5,10
IPMI
  • ASPEED AST2500
  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Graphics ASPEED AST2500 BMC port(s)
Network Controllers Dual LAN with 1GbE with Intel® I210
Input / Output
SATA 8 SATA3 (6Gbps) port(s)
LAN 2 Nos. RJ45 Gigabit Ethernet LAN ports
USB
  • 8 USB 2.0 port(s) (2 rear; 6 via header)
  • 2 USB 3.0 port(s) (2 rear)
Video Output 1 VGA port(s)
Serial Port 2 COM Port(s) (1 header; 1 rear)
DOM 2 SATA DOM (Disk on Module) power connector support
TPM 1 TPM Header
Power Supply
800/1000W Redundant Platinum/Titanium Power Supply (92%-96% Efficiency)
Form Factor
3U Rackmountable
System Monitoring
  • Chassis intrusion switch (optional)
  • WOL, UID, RoHS, M.2 NGFF connector, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, ACPI power management
Drive Bays
  • Optional 2 x 2.5" hot-swap drive bays
  • 16 x 3.5" hot-swap SAS/SATA drive bays
System Cooling
Fans
  • 2x 8cm hot-swap exhaust fan(s) & air shroud
  • 3x 8cm hot-swap redundant PWM cooling fan(s)